VT-UIPM-431-H | VersaTRAK IPm2m Controller

Red Lion’s VT-IPM2M-113-D RTU delivers powerful control in industrial automation applications. It has an operational tolerance for temperatures from -40 to 70°C (-40 to 85°C storage), humidity levels 5% to 95% RH (non-condensing). With UL Class I, Division 2 listing, CSA, CE and ABS Marine ratings, this RTU will operate reliably for years in the harshest environments and can be mounted close to the equipment it is controlling without any issues. The 10/100BaseTx (auto-detecting) Ethernet port is an RJ45 with Auto Crossover that can handle TCP/IP, ARP, UDP, ICMP, DHCP, Modbus/TCP, Sixnet, optionally PPP, DNP3, IEC60870-5-101/104 protocols while Serial ports include an RS-485 Port A screws (485+, 485-, GND) (2-wire half-duplex) and RS-232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND) where protocols (Master and slave modes) include Sixnet and Modbus RTU/ASCII; optional: Slave; DNP3, IEC60870-5-101/104. *Others available as Linux applications.
I/O description is as follows:
Discrete Inputs

• 8 channels sourcing or sinking (jumper/software selectable)
• Guaranteed ON voltage 9 VDC
• Maximum voltage 30 VDC
• Guaranteed OFF voltage 5 VDC and 1.5 mA DC
• Input resistance and current 10K Ohms and 3 mA @ 24 VDC
• Filtered ON/OFF delay 25 mS (20 Hz max. counting) for contact bounce filtering
• Fast ON/OFF delay 4 mS (100 Hz max. counting)
• Counter modes pulse, rate and run time
• Poll time (all channels) 5 mS to 20 mS configuration dependent

• 4 channels – sourcing 10-30 VDC
• Min. and max. output load 1 mA to 1 Amp sourcing per channel
• Max. OFF state leakage 0.05 mA
• Inrush current 5 Amps (100 mS surge)
• Typical ON characteristics 0.3 Ohms resistance and 0.3 VDC voltage drop @ 1A
• Poll time (all channels) 5 mS to 20 mS (configuration dependent)

• 2 channels
• Full scale range 4-20
• A/D and input resolution 16 bits (.003%); 2 uA (current range)
• Full scale accuracy +/-0.1% (@20 deg C) (factory calibration)
• Span and offset temp. coeff. +/-50 ppm per deg C
• Input impedance 100 Ohm (current range), 80 K Ohm voltage
• Current protection Self-resetting fuses
• DMRR 66 dB at 50/60 Hz (differential mode rejection)
• CMRR (common mode rejection) Not applicable since analog inputs are single ended
• Fastest update time 50 mS (both channels) *configurable for longer integration times for better noise filtering.

Red Lion RTU Controllers