The Model 770 C-Face encoder is a rugged, high resolution encoder designed to mount directly on NEMA C-Face motors.
Both sides of the encoder are C-Face mounts, allowing additional C-Face devices to be mounted to this encoder. Unlike many C-Face kit type encoders, the Model 770 contains precision bearings and an internal flex mount, virtually eliminating encoder failures and inaccuracies induced by motor shaft runout or axial endplay.
The advanced Opto-ASIC design provides the advanced noise immunity necessary for many industrial applications.
This encoder is ideal for applications using induction motors and flux vector control. The Model 770 provides speed and position information for drive feedback in a slim profile - only 1.00" thick. The Thru-Bore design allows fast and simple mounting of the encoder directly to the accessory shaft or to the drive shaft of the motor, using the standard motor face (NEMA sizes 56C - 184C).
The tough, all metal housing resists the vibration and hazards of an industrial environment.
|4.75 | 28 DC to 70° C | 24 DC to 100° C||100 mA max with no output load||Incremental||Open Collector | Push-Pull | Pull Up | Line Driver||1 per rev.||200 kHz||0.005"||±0.050"||6000 RPM||All metal construction||3.3 x 10⁻³ oz-in-sec²||2.6 lb||10 g @ 58 to 500 Hz||50 g @ 11 ms duration||IP65 Opt A housing w/ gasket kit | IP50 Opt B housing|