EPC Logo

Model A58SE | Absolute Encoder

A58SE The Model A58SE is an EtherCAT or PROFINET-ready, multi-turn absolute encoder designed for harsh factory and plant environments.
It is particularly suited to applications where Ethernet-based connectivity is required, and the encoder must retain position information after power-off events. Easily designed into a wide variety of system applications, the A58SE plugs directly into your network with minimal provisioning for rapid deployment, facilitating data exchange among a myriad of networked devices.
The Model A58SE retains absolute position information even after a power loss, facilitating speedy system recovery at start-up without the need for system re-homing.
Ready for Industry 4.0 and for the Industrial Internet of Things (IIoT), data exchange between the Model A58SE and other applications has no influence on the control loop.
The Model A58SE is non-reactive and can work independently from the PLC or master, transferring data through network gateways to other automation networks and sites, and up to the cloud for analysis.

 Single/Multi Turn (16 Bit ST/43 Bit MT)
 No Gears or Batteries
 EtherCAT or PROFINET Ready
 Shaft loads up to 400 N

Model A58SE

* See Data Sheet For Full Specifications
InputVoltsInputCurrentOutputFormatAccuracyMaxSpeedShaftRadialAxialStarting TQWeightVibrationShockSeal
10 DC up to 32 DC125 mA typicalEtherCAT | PROFINET± 0.0878° (≤ 12 bit)8000 RPMstainless steelMH, MK 28lb 6-8mm, 49lb 10mm | MM 90lb, MP 13lbMH, MK 27 lb | MM 90 lb, MP 11 lb1.416 oz-in approx.24.7 oz 200 m/s² 10 Hz-1000 Hz | 20g 10Hz-1000 Hz5000 m/s6 ms² | 510g, 6msIP65

© 2023 dp Technologies Group. All rights reserved.