EPC Logo

Model 865T | Stainless Steel Encoder

865T The Model 865T C-Face encoder is a rugged, high resolution encoder designed to mount directly on NEMA C-Face motors.
Both sides of the encoder are C-Face mounts, allowing additional C-Face devices to be mounted to this encoder. Unlike many C-Face kit type encoders, the Model 865T contains precision bearings and an internal flex mount, virtually eliminating encoder failures and inaccuracies induced by motor shaft runout or axial endplay.
The advanced Opto-ASIC design provides advanced noise immunity necessary for many industrial applications. This encoder is ideal for applications using induction motors and flux vector control.
The 1.00" thick model 865T provides speed and position information for drive feedback in a slim profile. The thru-bore design allows fast and simple mounting of the encoder directly to the accessory shaft or to the drive shaft of the motor, using the standard motor face (NEMA sizes 56C - 184C).
The tough Type 316 Stainless Steel housing resists the corrosion and hazards of a caustic industrial environment.

 Up to 4096 CPR
 316 Stainless Steel Housing
 NEMA sizes 56C - 184C
 Opto-ASIC Technology

Model 865T

* See Data Sheet For Full Specifications
InputVoltsInputCurrentOutputFormatOutputTypeIndexFreqSpeedHousingRadialAxialInertiaWeightVibrationShockSeal
4.75 | 28 DC to 70° C | 24 DC to 100° C100 mA max with no output loadIncrementalOpen Collector | Push-Pull | Pull Up | Line Driver1 per rev.200 KHz6000 RPMType 316 Stainless Steel0.005"+0.050"3.3 x 10⁻³ oz-in-sec² Typical6 lb typical10 g @ 58 to 500 Hz50 g @ 11 ms durationIP50 | IP66 between two C-Face w/ gasket, or H1 cover


© 2020 dp Technologies Group. All rights reserved.