The Model 58TP Programmable 58 mm Accu-CoderPro thru-bore encoder is specifically designed for the challenges of harsh industrial environments.
Its advanced set of electronics allow the encoder to be programmed to meet your exact application needs. Using EPC's optional programming module, users may select the output type, 32 different waveforms, and any resolution from 1 to 65,536 CPR - that's 262,144 counts using 4x quadrature counting.
These programming features allow a single encoder to be configured for multiple applications, enabling one encoder to replace many different part numbers. This provides for some big cost savings on inventory and down-time replacement.
The 58TP can also be configured and shipped with specs pre-programmed, with no on-site programming needed.
|4.75 to 30 VDC max||100 mA max with no output load||Incremental, Programmable||Open Collector | Pull Up | Push-Pull | Line Driver||1 per rev. | Programmable||2.7 MHz||Better than 54 arc-sec||303 Stainless Steel||0.005" max||±0.030 max||6000 RPM||IP50 3 oz-in | IP64 4 oz-in | IP66, IP67 7 oz-in||5.5 x 10⁻⁴ oz-in-sec²||10 oz.||10 to 2000 Hz A 20g||80g @ 6 ms Duration||IP50 Std; IP64, IP66, IP67 optional|
Have Questions? Call Us!Toll Free: (877) 799-9400
© 2023 dp Technologies Group. All rights reserved.